About Author

Month: October 2020

Tool For Evaluation Of Vaporized Hydrogen Peroxide Masks Into Small Rooms!

The outbreak of the COVID-19 pandemic has caused strain over the supplying as well as the distribution of N95 masks. The vaporized hydrogen peroxide mask disinfection systems are getting installed at different locations in the US.

The shipment of the systems is being deployed into small rooms into shipping containers. We are here looking tool equivalent for vaporized hydrogen peroxide masks into small rooms. To attain a comprehensive guide regarding it, consider the reading details mentioned below.

Vaporized hydrogen peroxide masks into small!

The room used for hydrogen peroxide disinfectant have different sizes and different materials and presented with varying air change rooms. All these parameters make a difference in air change rates; also, all these criteria will make a significant impact upon effective VHP disinfection dose, which is received by the mask.

Any losses for such accounts will lead to effective N95 mask disinfection when they are used in such locations. It is essential to understand the VHP concentration in air of different room sizes also come in handy to disinfect masks as per the room size, vaporized hydrogen peroxide deposition for surfaces, and with use of mass balance approach in air change rate as well. With the VHP concentration, you can understand about disinfectant that has been deposited on masks as well.

The final verdict

From the details stated above, it is easy to understand that vaporized hydrogen peroxide masks in small rooms can affect the quality. The small rooms where these masks are stored are of different size as compared to the regular ones. To understand any losses or disinfectant on the masks, you need to estimate the VHP concentration before that can assist you in understanding all the essential things surely. We hope the details stated above make sense to you in learning better about vaporized hydrogen peroxide masks.

The Revolution Of Hair Treatment Brazilian Keratin Treatment

Do you spend hours styling your hair everyday? If you are always looking for the best hair treatment for you frizzy hair & curly, you should be aware of keratin treatment which is also called as Brazilian Keratin Treatment. If you still haven’t heard about it, you might want to find out how it turn your hair to shiny, smooth, silky, manageable about just one treatment. I know it might sound too good to be true, but it is a truth! This will be the revolution of new hair era, it change your curly hair to straight hair or wavy soft hair. Yes, you can have good hair day everyday!

Among all the keratin treatment in the market, Brazilian Keratin Treatment is the well know method that can change your hair totally without damage your hair. In fact, it strengthen and repair your hair with the keratin which is also know as hair protein. You will notice the obvious perfect result after first treatment without much waiting. Continuously apply the same treatment after every 3 months will make your hair healthier and stronger.

What People Said about the Brazilian Keratin Treatment – Thousands of people have experience the brazilian keratin treatment now, so you can’t go wrong with it. They are amaze by the results of the treatment, and just can’t believe it that their hair become so soft and shiny with just one treatment. Now they spend less time than before to manage their hair, and also the money save on going to salon. Having smooth and manageable hair not more longer a dream for them, and they are so happy to share the experience with everyone after the treatment.

How does Brazilian Keratin Treatment works?

Keratin is the protein that can found in your hair. Due to the damage of our hair, and the original keratin found in our hair become very dry, which make our hair unmanageable. By applying the keratin treatment on your hair, and sealed it with 450C temperature titanium plated flat iron on your hair, also lock the moisture together during the process. Immediately after the first treatment, you will notice your hair change totally, to silky & shiny and also easily manage. If fact, you may choose to straightening your hair or remain the original curl of your hair during the treatment. Normally the treatment will last about 3 month with proper care after the treatment. At the official site, you can have a look over inoar moroccan keratin treatment reviews to get the proper treatment of the hairs. During the treatment, there is less damage to the scalp. There is the availability of the shinning in the hairs with the professional treatment.

This treatment used to be available at the salon only with very expensive price tag, which only affordable by celebrity, but now you can get it done at home too.

How Much Botox Do You Need

Cosmetic procedures are a great way in today’s time to boost your looks and get rid from your aging signs. It is due to the wide range of cosmetic procedures such as Botox injections, collagen injection, surgical and non surgical facelift, etc. that you can now face your progressing age with a bright smile and youthful skin.

The botox cosmetic treatment primarily attacks the wrinkles and the age lines on the face from their very base. Injecting a fill into the frown lines on the face will not cure them, unless you use the BOTOX treatment. The botox injection injected into the skin will not just remove the frowning lines but further prevent similar lines from appearing on your skin. Thus, if you can prevent the appearance of wrinkles from its root cause, you will successfully be able to prevent wrinkles from appearing on your face. It is due to this reason that BOTOX cosmetic treatment has been closely followed since its first use in the late 70’s.

The entire BOTOX treatment takes near about just an hour’s time and varies greatly on the number of injections injected on various parts of the face. According to the clinical results obtained, the treatment has no or very minimal side effects that can also be cured through proper medications prescribed by the doctors. Hence, BOTOX is believed to be the most safe and also effectual treatment for fighting the aging signs from your face. The positive result of the treatment lasts for as many as 4 to 6 months, after which you need to get back to your doctor for getting the treatment again. However, it is also essential to understand the amount of BOTOX required for removing the aging lines from your face and neck.

Canada is particularly famous for world renowned Botox treatment as it has been found that many people drive down from US to get their surgery done, which speaks volumes of its success even though Botox injection is available at cheaper price but looks cannot be compromised so they go for the best treatment possible. While filler treatments for Vancouver men are the norm, Montreal has the same for women.

Well, the amount of botox required to treat your wrinkles largely differs based on a few basic points. Some of these crucial points include:

* Location where the botox injection will be injected.

* Male and female patient undergoing the treatment.

* The types of facial expressions and muscle movements required in the areas where the injections will be injected.

* The condition of the skin and the deep wrinkle lines on your face.

Botox is usually measures in small units. Hence, based on your skin requirements you may need just a few units of BOTOX to be injected deep within your skin. The appropriate amount of Botox injected into the skin will only help you enjoy the best results. Well, some of the basic areas where people prefer undergoing the Botox treatment include:

* Glabella:

This is the area just between your eyebrows. When angry, you can see these lines forming just near your eyebrows.

* Crow’s feet:

These lines are formed when you stress yourself for seeing certain things. More you stress yourself, more are these lines formed on your face.

* Forehead:

Once you raise your brows while making an expression, you will see several furrows being formed on your forehead.

In the most usual conditions, women undergoing the BOTOX therapy require 15-30 units of botox for the glabella region. Similarly, for the forehead and the crow’s feet you require 15-30 units and 5-15 units respectively. This range of units may however vary based on your requirements and the intensity of wrinkles on your face. Moreover, the number of units also varies depending upon your muscle strength and the effect you want on your skin through the botox injections treatment. As compared to men, women require fewer amounts of BOTOX injections as they have softer muscles and less area. Hence, men require more botox units for removing their aging lines from their face. However, to look natural and somewhat realistic, you can inject fewer units of botox into your skin.

Incredible Tips For Buying Hemp Products!

Hemp products can become an incredible choice for people who are looking for improving health by natural products instead of sticking to allopathic products. People should be focusing on the purchase of hemp products that are accurate for your body type.

We are here looking for incredible tips for buying the right hemp products. You can focus on the tips mentioned below for easy buying of hemp products to attain numerous benefits. 

 Tips for buying hemp products!

Buying hemp products seems a simple job, but it is a tedious one to perform, especially if you are a beginner to cbd. By considering simple aspects, you can get assistance in knowing the best product surely. 

  • Be a thc detective: identifying the amount of thc into the cbd product is a necessary aspect that every cbd user must be familiar with. One should understand the type of cbd they are purchasing for the long term from full spectrum cbd, cbd isolate, broad-spectrum, or others. The legal percentage of thc is restricted to 0.3%, so the product you are using must not exceed more than that.
  • Learn the ingredients: you must learn the ingredients that are packed within the best cbd products, which will play a major impact on your body. Be careful regarding the products and chemicals that have been used in cbd. Especially when you are choosing for cbd edibles, the artificial sweeteners and colors should be paid closer attention to not attaining poor products.  

Better know your sources: when you are buying for hemp products, it understands the sources that include for cbd sources. Us grown hemp are provided with higher quality, but not all brands provide great quality, so you must know the sources of the products to attain reliable quality product.

Everything You Dont Know About Home Managers May Shock You

Property manager will always keep himself up to time using the new regulations get place at local, condition and federal level. The compliance and up to code are important to protect your shopping mall investment decision. Knowledge about Local Market: it ensures that a property manager knows about just what local renters are searching for. Making cost mindful and smart suggestions for the owner will increase general return while enhancing the particular property. By doing this, he could help in increasing leasing rates, decrease vacancy plus lower turnover. With all these, it becomes a lot more desirable. Property manager in Newark, DE advises that Property Management Companies will usually take proper care that your property constantly stays in the renting market. Are you the multimillionaire and do not have time to manage your home? If yes, then property supervision companies can help an individual a lot. These firms consider all the details associated with your property and handle that inside a proper way. 

One of the most crucial tasks of a property office manager or a property management company may be the liaison between typically the ownership and the particular tenant. They provide buffer with regard to those owners who wish to distance themselves from their tenant constituency. There are a lot associated with such form of companies available out there, however, you need to opt for a company which often works professionally and appropriately. Before hiring any business you can examine these details. Generating the decision to use the help of a property manager can benefit you greatly. A lot of your own time could be freed up to target other aspects of your life these kinds of as family and work since well as bettering the value of your home and upping your cash circulation. Hiring the wrong rental property manager can cost you thousands of pounds, or even worse they could lose you your property. 

There are a variety of factors to consider when you’re deciding about regardless of whether or not you’re proceeding to hire a property manager to manage your investment property with conveyancer fees or if you are going to manage it yourself. Set up a meeting: want to set your property in the particular wrong hands? No! And then do proper check just before hiring. Making a meeting is usually the best way to learn about the company. The meeting will help you to know about your property manager and good connection always help both operator as well as typically the property manager advisable about how exactly they will work plus enhance the return of typically the property. Setting up the perfect plan can enhance profit whereas a most detrimental plan can force an individual to lose your home. Therefore , be careful.

A property manager always keeps himself updated with the new rules at all levels. One of their most important tasks is to provide buffers against those owners who wish to stay away from their tenants. It is a matter to think about, whether you want to hire a project manager or you could manage it yourself.

Cool Ideas For Wooden Bunk Beds

Any family that has invested in a first home before the pitter patter of little feet knows the challenge of fitting more family into a smaller first home. That is why wooden bunk beds will always be a popular solution when a family outgrows the number of bedrooms in a home. Bunk beds are also popular for cabins at the lake and dorm rooms to make more room for two people to share smaller space.

Bunk beds are usually a couple of twin beds, with one set up over the other. The frame is simple and there may or may not be a ladder. Kids seem to prefer to climb up at the end of the bed anyway, but ladders are convenient for parents when they put their children to bed at night.

These days there are different configurations to suit most people’s taste in furniture. Although bunk beds were once fairly utilitarian, many newer beds have a twin over a double, stairs that double as dressers instead of ladders, beds that sit lower to the ground or have railing to prevent sleepers from falling.

Wooden bunk beds can be purchased and assembled at home or they can be made as a fun DIY project. You can even find a carpenter and let them create something unique for you. The wood may be unrefined and rugged or high gloss with fancy lathe work to make the furniture attractive. Sometimes as the family members begin to leave the nest, the children left behind move into their older siblings’ rooms so it is nice that a wooden bunk bed can be made into twins and retain attractive appearances too.

DIY Wooden Bunk Beds

You can find projects online or at home improvement stores that will show you step by step how to build a bunk bed on your own. Other than the basic tools such as a hammer, drill, screwdriver and saw you will need to buy strong, sturdy material that will stand the test of time and tolerate the heavier weight. The bed will not only hold precious cargo, it will also need to support a frame and slats or springs that will support the mattresses.

The plans you use will provide you with the measurements for the right size mattress to use. If the bed is likely to be used as a young child grows into a teen, it is probably a good idea to plan for their growth by building a longer bed. Think along those lines as you develop plans to for a DIY project for your kids.

Once all the pieces are cut and the bed has been assembled to assure it will come together well and be strong enough, you should disassemble it and move it to the room and then reassemble it. You won’t have to take it completely apart, just separate the top bunk from the bottom and that should be fine.

Different materials for bunk beds

The wood should be sturdy enough to hold the weight of the bed and the users. Solid, heavy wood is a great starter for the frame. Unfinished wood will allow the family to stain or paint the wood to suit personal tastes. Well furnished wood is what you should look for. Buying Täispuidust narivoodi is beneficial for the people. However, other material bunk beds are also sold in the market. let us understand more about wooden bunk beds. 

Composite material that looks like wood but resists damage over time may be a good idea if the bed will be used at a summer or seasonal camp. Natural wood may be vulnerable to the elements and insect invaders and weaken over time. Composite material used to build decks should make a great material for a bed frame as this material is rated to handle more weight than regular wood. Wood-plastic composite (WBC) is an option to consider if wood is an important factor to your plans.

Another great option for bunk bed frames is to consider using reclaimed wood from older buildings. Older wood is usually quite hard and was meant to last for years and years. Many old office buildings, factories, and older homes are taken down to make room for new construction. Rather than simply tear down the older buildings some companies sell the old materials in reclamation auctions. If you can find a sturdy door frame, rafters, old doors and hardwood floors that are in good condition, you may have found great material for a wooden bunk bed.

5 Incredible Ideas For Building The Lego Table With Storage

While playing Lego, kids can scatter the toys. Then it all ends up on mommies to collect and store the toys. As Lego is the favorite game for children, they can’t see their Lego stuff and keep trying new creations for it. Lego is an education game, but if your child can’t find the stuff when scattered, what is the point? A solution to this problem is getting a lego table with storage for your children to play and store the Lego stuff on it, which is a kind of fun for kids. Henceforth, here are some of the incredible ideas for building a Lego table with storage for kids. 

How to build a Lego table:

Building a Lego table is not a big deal. You can also find your creativity to create the Lego table with storage. However, creating storage with a Lego table to boost up your creativity is as follows.

  • Lego table made with trays:

You can use trays for making a Lego table. You will need a little carpenter work for making the storage boxes down to the tray stood on two wooden supports. 

  • IKEA is the best option for a Lego table:

IKEA tables are the best when used for Lego. You do not need to modify them because they can be adjusted very easily to store the Lego stuff neatly.

  • Top-sliding tables are the perfect Lego table:

Top-sliding tables can be used to store the Lego. It is always convenient to store Lego stuff in a box with sliding doors on the top. You can easily find them whenever you need them.

  • A coffee table can be turned into a Lego table:

An old coffee table can be used as a Lego table. By attaching storage wooden square boxes at the downside of the coffee table, you can efficiently store your Lego stuff. 

Sum up

What would be easy enough then a lunch box?: When your kid has a little Lego stuff, You can use a lunch box instead of large tables occupying space.

How To Separate colors In Photoshop

I couple of months ago I posted a blog entry about color theory. I had recently read and been amazed by an article on the BBC website entitled the science of optical illusions. Essentially it argued that we perceive and recognize our surroundings primarily through color, i.e. I can tell the difference between a tiger and a forest because the lion is orange and the forest is green. Or to put it another way we recognize that there is a big distinction in color between the lion and the background. 

The article went on to argue that we evolved this way as a defense mechanism, as a way of identifying threats and surviving. All very interesting, but what does this mean for photography? All too often I have tried to edit an image, usually a landscape, and tried to draw out as much color as possible. The simplest way is to use the vibrancy or saturation controls. But foolishly this is one of the most destructive things we can do to an image; it can result in out of gamut colors, garish tones and banding. 

What is more it isn’t necessary. The BBC article demonstrates that color is subjective and that our perception of color is often affected by other colors that are in close proximity – note the Rubik’s cube example beneath. The Rubik’s cube demonstrates that one color can look completely different when surrounded by other colors. This being the case, if we want to create a more colorful image it is important to separate colors, or in other words to create distinction between them. This will have the effect of creating a more colorful image rather than an over saturated one.

Note that the square in the top middle looks different to the square in the middle of the front – they are actually the same color

Saturation and/or Vibrance

The problem with the vibrancy and saturation sliders in Lightroom and Photoshop Mac is that they do just that, they push the existing colors harder but they do nothing to separate them. They are a good place to start though and are important tools for identifying the colors that already exist in an image. Remember this blog post is all about tweaking the colors that are already present in the image in order to create separation and not so much about saturating them. You may find it useful to crank these sliders way up in order to identify what colors are hiding in the file and then to take them back down again before continuing.

Change the Camera Calibration profile

The very next thing I do in my editing workflow is to change the camera calibration inside of Lightroom or ACR (Adobe Camera Raw). When you shoot in Raw (you do shoot in Raw right?) the camera records the different picture styles that you could have shot in, for example Landscape or portrait. These used to be important when we shot jpeg because they defined how the camera interpreted color and contrast. When you shoot jpeg that interpretation is ‘baked’ into the file, but when you shoot in Raw you have the choice of applying them in Lightroom or ACR instead. The Camera Calibration panel inside of Lightroom and ACR is loaded with the different picture styles that your camera has and it also includes a few Adobe ones. Experiment with the different calibrations until you find one that’s close to how you want the final image. Also note that the Nikon shooters usually get a few more than the Canon shooters.

This is a real quick and easy way to create difference between the colors. But be careful as this method also changes contrast and saturation with it. You can also tweak the colors yourself with the RGB (Red, Green & Blue) sliders, offering various hues and saturations.

HSL or Hue, Saturation and Luminance

After getting the Camera Calibration where I would like it I also make changes to the Hue, Saturation and Luminance of my image. In Lightroom and ACR this panel is called HSL. The focus here is to change the Hue values for the different colors in order to create color separation. Starting from the top and working your way down is a good workflow otherwise your new changes tend to effect the old changes too much. This is a real quick and easy way of differentiating colors since both Lightroom and ACR already separate the hues for you, all you have to do is exploit it by changing them.

The beauty of all this is once you have found a combination of colors that you like you can save it as a preset for future use. Recently the kind folks at OnOne Software shared a set of free Lightroom presets that do just that. Note that these presets often do more than just alter the HSL of your image, but if you stick to the WOW-HSL presets they will get you started. These presets are a good starting point for your images and you can always tweak the sliders if they aren’t quite right for your image. Or if you find yourself going back to the same one again and again you should make a note of the exact changes that the preset is doing for future reference, and then you can apply those changes yourself.

Hue changes inside of Photoshop

Once you have moved your photo over to Photoshop there are many different ways to separate colors. One of the quickest ways to do this is with the Hue and saturation adjustment layer. Most people use this tool to simply saturate their photos, not many people know that you can do this on a color by color basis. Notice in the adjustment layer that there is a second drop down menu that allows you to select which color you want to change, and also note that there is a threshold at the bottom of the dialogue box which allows you to control how Photoshop divides the colors. An example where this may become handy is when adjusting greens I often find that Photoshop recognizes them as a yellow (maybe I’m a bit color blind), by simply adjusting the threshold I can get Photoshop to change only the greens in the image. Cool huh!

Another way I like to add color to an image is with a curves adjustment layer. In an earlier blog post I showed a cool method of masking called luminosity masking. When you combine this method with a curves adjustment layer you can increase mid tone contrast, which also increases saturation across the image. Or you can simply create a simple S curve in order to increase contrast and this will automatically increase color saturation in your image. If you don’t like what the contrast is doing to the image switch the blend mode to color and it will keep the color but not the contrast. If you like what the contrast is doing but don’t like the way it has affected the colors, switch the blend mode to luminosity.

Conclusion

These are the easiest and quickest ways that I know of to create color separation in your images. Remember that this is all about creating a difference between colors and not about saturating them and that just by creating difference you are actually creating a more colorful and therefore a more impactful image. In the near future, I will create a more advanced blog post about LAB mode. Using LAB mode is the ultimate method for creating differences in colors however it is too time-consuming and in-depth for this blog post. Until then.

 

Use Social Media Marketing Enhance Presence Exhibition Trade Show

Presenting at a trade show can be a major expense for any business and often a huge burden for small businesses. The cost of the booth, marketing materials, staff time, travel and hotels means that the exhibition really needs to boost your company’s visibility and generate quality leads for your business. Luckily, effective social media marketing will enable you to maximise to build excitement for the event, book appointments with potential customers and enhance your overall marketing presence. Here are three ways you can use social media marketing to leverage your investment in the trade show:

Before the exhibition:

Use Facebook, Twitter & Linkedin:

Use the above social media channels to build anticipation & let everyone know that you’ll be attending the trade show and that there will be some great promotions on offer at the show. You’ll also want to send out an email to your contact list about your exhibit and special trade show deals. Further maximise your exposure by encouraging everyone to re-tweet and share your information about your promotion. This is a really great way to generate interested followers in the weeks before a trade show. While, in the final days leading up to the show, remind your followers & fans on Facebook and Twitter that you’ll be exhibiting. Also, because trade shows are noisy & busy places, try to offer your followers, fans and contacts private appointments to meet with you at the trade show. The services of the business people are great with a click at https://losfamos.com/ site. The advertising of the products and brands are great at the social media platform. You can register at different platform to meet the right results. The attending of the trade show will offer the right results. 

Participate In The Comment Sections Of Blog Posts & News Stories About The Trade Show

A lot of people who attend trade shows will read blog posts and news stories about the event before they attend. By commenting on these posts and stories (and sharing them with your social networks), you’ll attract visibility and attention to your company or service, which may in turn lead to a meeting at the show or a pre-show enquiry by email or social media.

Contact Bloggers, Journalists & Other Non-Competitive Exhibitors

Bloggers & journalists attend hundreds of trade shows each year. They’re always after a story and keen to capitalise on the benefits of trade shows and events. Reach out them to on Twitter and see if they would be interested in stopping by to interview a company representative. Equally, use Twitter to contact other companies that plan to exhibit at the show and try to set-up a meeting to talk about ways you can help each other prosper.

During The Show:

Organise a social promotion for each day of the exhibition.

This may consist of a promotion with a daily prize being announced each lunch time at the show. Your goal should be to attract visitors to your booth, offer prospects a taster of your services and incentivise them to promote your prize using their social media. Stick up a big sign/poster in your booth that advertises the promotion and times of the prize draw. Let everyone know that prize winners will be notified via Facebook & that to find out if they’ve won they will need to ‘like’ your Facebook page first. Each day, remember to update your Facebook & Twitter pages with photos and comments about the show, and go out of way to give shout outs on Twitter to other companies you meet there.

Give away an ebook in exchange for a Facebook like or an email address.

Use or IPhone or Android smartphone to collect email addresses on the fly and use the seconds it takes to input the prospects email address to build a rapport with them and find out more about their needs. Ensure that the email containing the link to the e-book is just the first email in a drip-feed or 6-12 emails that the prospect will receive from you over several months to a year. Prepare your drip emails in advance of the show & always make sure that they contain value rather than just sales spiel.

How To Use Social Media Marketing As A Strategy

Social media marketing as a strategy is a winner for any business you promote online. Thankfully, there are ways to use social media, but it does have a learning curve.

You’ll need to know what your goals and objectives are before you can move forward with a social media strategy. This means that you take into account what type of business you have and what interests your audience.

Remember, being social is all about engagement and without that you’ll lose some of your audience right away.

Today, we’ll discuss using social media marketing as a strategy so that you can connect with your customers without fail every time, every day!

Understanding How to Use Social Media Marketing as a Strategy

Did you know that goals have everything to do with how you will develop social media and how you’ll use it? Using social media marketing as a strategy also means that you need to know everything possible about your audience.

Here are some simple steps to make sure that you can put together a solid strategy every time.

Identify the goals for your business. What do you wish to achieve with your business? Are you trying to sell products, service, or just provide information? Whatever your business is, identify your personal business goals and you’ll have a clear direction on where your brand is going as well as reducing your marketing costs. Always have a few goals that are most important to you before you build out a full strategy that you dump money into. Set marketing objectives. Marketing is what you do to support your business, and it’s important that you define your objectives before you make more investments as you would with social media. You need to put effort into tracking and reporting so that you know where you stand with the marketing methods you’re using. If you put a method to work and it doesn’t prove to be successful you’ll want to rethink the strategy you’re using. There are tons of analytics tools on the market to help you do this, so don’t be too long about it. Know thy customer.

You’ve probably heard this before but you really need to know your customer. If you don’t know everything about them you’ll miss out how you could earn their business over and over. You need to know everything about them including what they like to eat, what they like to wear, and where they travel. This means you need to create a buyer or marketing persona to help you understand where you should best put your efforts. You need to know their age range, their habits, what they like and what they don’t like, and most of all their income. Detail wins the day when you are focusing on your ideal customer. What is the competition doing? This is a good point, although I have to admit I believe you should focus on dominating your space. If you are always focused on what the competition is doing, you’ll waste valuable time. Focus on what you can do to become better, and then get to it!

The terms and conditions as mentioned by YouTube policy does not binds any channel from buying subscribers but however it does oppose bot subscribers, it may lead to a permanent bar on the channel or may have a strike on the channel. So, you have to be very much aware about How to Spot Fake YouTube Subscribers.