How to Build a Chicken Coop for profitable enterprise
Raising chickens can be a profitable and fulfilling enterprise – as long as you have proper housing for your chickens. One of the important things to learn about how to build a chicken coop is what the chickens need to be content and happy. Of course, they need feed since that is one of the primary thoughts on their minds, but the interior of the coop must accommodate their other needs.
Although chickens are different from other wild fowl, they still need to roost off the ground. You will need to build a rack for them to sit on while they sleep.
Things You’ll Need:
- 8-foot 2″ x 4″ boards
- 1″ x 4″ boards
- 1″ x 6″ boards
- Hay or straw
Attach a horizontal rail to the back wall of the coop about 5 feet above the ground using a 2 x 4. You will need to leave about 4 feet at one end for Steps 4 through 7. In an 8 x 12 foot chicken coop, your rack will be about 8 feet long.
Cut pressure treated 2 x 4’s to attach to the rail and sit on the ground approximately 5 to 6 feet from the back wall. In essence, you are forming a triangle. You will need four 8′ 2 x 4’s for this. Place one at each end and equally space the other two between them. You will need to cut both ends to fit, one to the ground, and the other to the rail.
Attach 1 x 4’s across the 2 x 4’s to give the chickens a place to perch. Six of these should be sufficient, spaced about a foot apart. This gives you enough spots for over 40 chickens.
Hens need a place to lay their eggs and they will seek a soft, comfortable spot anywhere they can find one. If you don’t build a place for their laying, you will find eggs all over the floor of the coop and in the yard. The next step in how to build a chicken coop is the laying shelf.
At the end of the coop that you left open, build a 2 x 4 frame that is the depth of the coop and about 2 feet off the ground. It can be 16″ to 24″ wide based on your preference. Add 2 x 4’s between the front and rear rails for bracing.
You will need two legs to support the front rail. The back and one end will be attached to the framework of the coop itself, so put one at the end and one in the middle.
Attach a piece of plywood or OSB to the top of the frame and band around the top to form a holding area. You can do this by using a 1 x 4 at the back and the end that is attached to the coop wall; then, use a 1 x 6 at the front and other end, aligning the top with the 1 x 4’s and nailing the bottom edge into the framework of the shelf.
Loosely fill the area within the band with hay or straw. If there are no other places in the coop or pen that are comfortable in comparison, the chickens should immediately begin to lay their eggs there.
If the time comes when the laying area doesn’t accommodate the layers, you can go above this shelf about two feet and build another. The thp home builders will make the throwing of the party entertaining and interesting. The coloring of the floor will match with the theme of the party. The chicken coop will meet the requirements of the person.
How to build a chicken coop depends on varying factors, but this should more than serve the needs of your egg layers. Good luck to you!